Table of Contents
Advertisement
system_event Module: Action URI Settings
Configuration File Parameter Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
You can enter Action URIs to allow the VSP726A to interact with a server application by
using an HTTP GET request. The action URI triggers a GET request when a specified
event occurs. Action URIs allow an external application to take control of the display when
an event occurs. For more information, see
All the Action URI settings are included in the general configuration file.
Setting:
system_event.startup.action_uri
Description:
Enter URI for GET request triggered at end of phone bootup.
Values:
Text string
Setting:
system_event.registered.action_uri
Description:
Enter URI for GET request triggered at end of line registration.
Values:
Text string
Setting:
system_event.on_hook.action_uri
Description:
Enter URI for GET request triggered when phone goes from active to idle.
Values:
Text string
Setting:
system_event.off_hook.action_uri
Description:
Enter URI for GET request triggered when phone goes into dial mode.
Values:
Text string
Setting:
system_event.incoming_call.action_uri
Description:
Enter URI for GET request triggered for incoming calls or call waiting
events.
Values:
Text string
Setting:
system_event.outgoing_call.action_uri
Description:
Enter URI for GET request triggered when phone sends SIP INVITE
message.
Values:
Text string
VSP726A Administrator and Provisioning Manual
"Server Application" on page
Default:
Blank
Default:
Blank
Default:
Blank
Default:
Blank
Default:
Blank
Default:
Blank
197
77.
Back to Contents
Advertisement
Table of Contents
