VTech ErisTerminal VSP726A Administrator And Provisioning Manual page 71

Using the WebUI
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
Programmable Key Type
Retrieve Parked Call
Quick Dial
Page
Multicast Page
Call Return
Group Call Pickup
Direct Call Pickup
XML App
VSP726A Administrator and Provisioning Manual
Description
Enables the user to retrieve a parked call. Pressing the key
dials the Parked Call Retrieval feature access code (FAC)
configured on the SIP Account Management page.
For some service providers, you must also enter a park
retrieval extension in the Value column. This value will be
dialled along with the Parked Call Retrieval FAC.
Configures the key to dial a number on the selected line.
After selecting Quick Dial, enter the number to be dialled in
the Value column. In the Account column, select the
account on which the number will be dialled out.
Configures the key to call one or a group of phones.
Pressing the key dials the Paging feature access code.
You must enter the feature access code for Paging on the
SIP Account Management page.
For some service providers, you must also enter a page
extension value in the Value column. This value will be
dialled along with the Paging feature access code.
You can configure pages to be automatically answered.
See "Page Auto Answer" under
Management" on page 46.
Configures the key to make outgoing multicast pages. In
the Value column, enter a valid Paging Zone ID (ranging
from 1 to 10). Multicast paging differs from standard paging
in that it is handled locally by the VSP726A and does not
require a subscription through the hosted server. To use
multicast paging, you must first set up paging zones on the
WebUI. See "Paging Zones" on page
pfk.x.multicast_zone in the configuration file.
Configures the key to dial the number of the last missed call.
Enables the user to answer a call ringing at another
extension. The call can be ringing at any extension in the
phone's call pickup group. Pressing the key dials the
Group Call Pickup feature access code (FAC) configured
on the SIP Account Management page.
Enables the user to answer a call ringing at a specific
VSP726A or compatible SIP telephone. Pressing the key
dials the Direct Call Pickup feature access code (FAC)
configured on the SIP Account Management page.
Depending on the server requirements, the user may then
need to enter the number of the ringing extension.
Configures the key to open the XML browser. Pressing the
key initiates an HTTP(s) GET request to the server. Enter
the URI of the XML application to be executed.
71
"SIP Account
75. See also
Back to Contents