VTech ErisTerminal VSP726A Administrator And Provisioning Manual page 34

Configuration Using the Phone Menus
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
3. On the Set static DNS menu, press

4. Press and then enter the IP address for the primary DNS server.

5. Press and then enter the IP address for the secondary DNS server.
.
6. Press Save
To set PPPoE:
1. From the Network setting menu, press
PPPoE mode), and then press SELECT.
2. Highlight Set PPPoE and then press SELECT. The Set PPPoE menu appears.
3. On the Set PPPoE menu, enter the PPPoE account Username.

4. Press and then press
5. Enter a password, if you are required to enter a PPPoE password.
6. Press .
Save
To set the VLAN ID for the VSP726A:
1. From the Network setting menu, press
press SELECT.
2. On the VLAN ID menu, press

3. Press and enter the WAN VID. Use the dial pad and the
characters. The valid range is 0 to 4095.

4. Press and then press

5. Press and enter the PC port number. Use the dial pad and the
enter characters. The valid range is 0 to 4095.
6. Press Save .
VSP726A Administrator and Provisioning Manual
 
to set Static DNS to Enabled.
or
 
to highlight IPv4 (which must be in
or
Edit if you are required to enter a PPPoE account password.
 
to highlight VLAN ID, and then
or
 
or to enable or disable the WAN VLan.
 
or to enable or disable the PC port VLan.
34
Backspc soft key to enter
Backspc soft key to
Back to Contents