Table of Contents
Advertisement
tone Module: Tone Definition Settings
Configuration File Parameter Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
The Tone Definition settings configure data for various tones for the purpose of localisation.
The Audio Manager component uses the data from this model to populate the mcu on
bootup.
Each tone definition must be at least one element containing a string of 12 element
attributes separated by a space:
"<num of freq> <freq1> <amp1> <freq2> <amp2> <freq3> <amp3> <freq4> <amp4>
<on duration> <off duration> <repeat count>"
Where:
<num of freq>: 0-2
<freq1>: 0-65535 (Hz)
<amp1>: -30–6 (dB)
<freq2>: 0-65535 (Hz)
<amp2>: -30–6 (dB)
<freq3>: 0 (for future development—modifying attribute has no effect)
<amp3>: 0 (for future development—modifying attribute has no effect)
<freq4>: 0 (for future development—modifying attribute has no effect)
<amp4>: 0 (for future development—modifying attribute has no effect)
<on duration>: 0-65535 (milliseconds)
<off duration>: 0-65535 (milliseconds)
<repeat count>: 0-65535
All the tone definition settings are included in the general configuration file.
Setting:
tone.call_waiting_tone.num_of_elements
Description:
Sets the number of elements for the call waiting tone.
Values:
1–5
Setting:
tone.call_waiting_tone.element.1
Description:
Defines the call waiting tone element 1.
Values:
Tone element string
VSP726A Administrator and Provisioning Manual
Default:
1
Default:
1 440 -22 0 0 0 0 0 0 500 0 1
201
Back to Contents
Advertisement
Table of Contents
