Table of Contents
Advertisement
Configuration File Parameter Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
Setting:
sip_account.x.cid_src_priority.2
Description:
Select the lower-priority caller ID source.
Values:
pai, from
Setting:
sip_account.x.call_rejection_response_code
Description:
Select the response code for call rejection. This code applies to the
following call rejection cases:
User presses
Forward Busy is enabled)
DND is enabled
Phone rejects a second incoming call with Call Waiting disabled
Phone rejects an anonymous call with Anonymous Call Rejection
enabled
Phone rejects call when the maximum number of calls is reached
Values:
480, 486, 603
Setting:
sip_account.x.dtmf_payload_type
Description:
Set the configurable RTP payload type for in-call DTMF.
Values:
96–127
MAC-specific configuration file settings
Setting:
sip_account.x.sip_account_enable
Description:
Enables account x to be used by the device.
Values:
0 (disabled), 1 (enabled)
Setting:
sip_account.x.label
Description:
Sets the text that identifies the account on the device LCD. The account
label appears on the idle screen, dialling screen, and other call
appearance screens.
Values:
Text string
VSP726A Administrator and Provisioning Manual
Default:
from
Reject
for an incoming call (except when Call
Default:
486
Default:
101
Default:
0
Default:
Blank
144
Back to Contents
Advertisement
Table of Contents
