Table of Contents
Advertisement
Using the WebUI
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
Setting
Password Dial Length
Web Server
Setting
HTTP Server port
Enable Secure Browsing
HTTPS Server port
To configure Web Server Settings:
1. Enter the HTTP Server port number. The default setting is 80.
2. Enable or Disable Secure Browsing. When enabled, the HTTPS protocol is used, and
you must select the HTTPS server port in the next step.
3. Enter the HTTPS server port number. The default setting is 443.
Changing the Web Server settings will reboot the VSP726A.
VSP726A Administrator and Provisioning Manual
Description
Enter the PIN number length. All digits within this length are
masked. Any digits beyond this length are not masked. For
example, if the Password Prefix is 99 and the Password
Dial Length is 3, then 9912345 will be rendered as 99***45.
Description
Port used by the HTTP server.
Sets the server to use the HTTPS protocol.
Port used by the HTTPS server.
117
Back to Contents
Advertisement
Table of Contents
