Appendix A: Configuration File Settings
This section lists the available options for all the settings within the configuration file.
Most settings in the configuration file have an equivalent in the WebUI (see the
settings tables in Using the WebUI on page 9). However, the options you must enter
when editing the configuration file have a different syntax and format.
The settings are divided into modules. Each module loosely corresponds to a page on
the WebUI. You may wish to reorganize the modules within the configuration file
itself. The configuration file settings can be listed in any order, and the configuration
file will still be valid.
"sip_account" Module: SIP Account Settings
The SIP Account settings enable you to configure SIP accounts for the base station.
You can add up to six accounts for each base station. Each account requires you to
configure the same group of SIP account settings. The SIP account settings for each
account are identified by the account number, from 1 to 6 for the VSP600 base
station, for example.
For example, for account 1 you would set:
sip_account.1.sip_account_enable = 1
sip_account.1.display_name = 1001
sip_account.1.user_id = 2325551001
and so on.
For account 2, you would set:
sip_account.2.sip_account_enable = 1
sip_account.2.display_name = 1002
sip_account.2.user_id = 2325551002
and so on.
The SIP account settings follow the format: sip_account.x.[element], where x is an
account number ranging from 1 to 6 for the VSP600 base station.
All these settings are exported when you manually export the configuration from the
base station.
General Configuration File Settings
Setting:
sip_account.x.dial_plan
Description:
Sets the dial plan for account x. See Dial Plan on page 15.
Values:
Text string
VSP600/VSP601 Administrator and Provisioning Manual
Default:
60
Appendix A: Configuration File Settings
Blank
Need help?
Do you have a question about the VSP600 and is the answer not in the manual?