Table of Contents
Advertisement
Configuration File Parameter Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
Setting:
network.pc_port.enable
Description:
Enable or disable the PC port to operate in hub/switch mode (depending
on the Enable PC Port Mirroring setting).
Values:
0 (disabled), 1 (enabled)
Setting:
network.pc_port.mirroring.enable
Description:
When the PC port is enabled, enable PC Port Mirroring to set the port to
operate in hub mode (network traffic on the WAN port is reflected in the
PC port). When Port Mirroring is not enabled, the port operates in switch
mode.
Values:
0 (disabled), 1 (enabled)
MAC-specific configuration file settings
Setting:
network.ip.mode
Description:
Sets the IPv4 network mode.
Values:
disable, dhcp, static, pppoe Default:
Setting:
network.ip.static_ip_addr
Description:
Sets a static IP address for the network.
Values:
Text string (IPv4)
Setting:
network.ip.subnet_mask
Description:
Sets the subnet mask for the network.
Values:
Text string (IPv4)
Setting:
network.ip.gateway_addr
Description:
Sets the Gateway IP address.
Values:
Text string (IPv4)
Setting:
network.ip.dns1
Description:
Sets the primary DNS server IP address.
Values:
Text string (IPv4)
VSP726A Administrator and Provisioning Manual
Default:
1
Default:
0
dhcp
Default:
Blank
Default:
Blank
Default:
Blank
Default:
Blank
153
Back to Contents
Advertisement
Table of Contents
