Using The Network Setting Menu - VTech ErisTerminal VSP726A Administrator And Provisioning Manual

Configuration Using the Phone Menus
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299

Using the Network Setting menu

Use the Network setting menu to configure network-related settings for the VSP726A. For
more information about these settings, see
"Advanced Network Settings" on page
To use the Network setting menu:
1. From the Admin Settings menu, press
then press SELECT.
The Network setting menu appears.
 
2. Press or to highlight the desired option, and then press SELECT:
 IPv4
 Mode (DHCP, Static IP, PPPoE, Disabled)
 Set static IP
 Set static DNS
 Set PPPoE (Point-to-Point Protocol over Ethernet)
 IPv6
 Mode (Disabled, Auto, Static IP)
 Set static IP
 Set static DNS
 VLAN ID
To set the network mode:
1. From the Network setting menu, press
or IPv6), and then press SELECT.
The selected network type screen appears (IPv4 menu shown below).
2. With Mode selected, press
The Mode menu appears.
VSP726A Administrator and Provisioning Manual
"Basic Network Settings" on page 84
86.
 
to highlight Network setting, and
or
 
or to highlight your network type (IPv4
Select .
32
and
Back to Contents