Table of Contents
Advertisement
softkey Module: Custom Soft Key Settings
Configuration File Parameter Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
The custom soft key settings allow you to select which soft keys can appear on the Idle
screen, the Call Active screen, the Call Held screen, the Live Dial screen and the Transfer
Setup screen. You can also specify the position of each soft key. Softkeys appear on the
VSP726A screen in the same order as the softkey values you enter. Enter soft key values
separated by commas. For more information, see
can specify a maximum of nine soft keys (three levels) for each parameter.
The soft key settings follow the format softkey.[element].
All the soft key settings are included in the general configuration file.
Setting:
softkey.idle
Description:
Specifies the soft keys visible on the idle screen.
Values:
blank, dir, call_log, redial,
message, dnd, cfwd, cfna,
cfwd_all, cfwd_busy,
intercom, retrieve, callback,
grp_pickup, dir_pickup, line,
settings
Setting:
softkey.call_active
Description:
Specifies the soft keys visible on the active call screen.
Values:
blank, new, park_call, end,
hold, pri_hold, transfer,
conf, flash,hs_pick,record
Setting:
softkey.call_held
Description:
Specifies the soft keys visible on the held call screen.
Values:
blank, new, retrieve,
grp_pickup, dir_pickup,
end, resume, transfer, conf,
hs_pick
Setting:
softkey.live_dial
Description:
Specifies the soft keys visible on the live dial screen.
Values:
blank, dir, call_log, redial,
message, end, dial, input,
cancel, backspc
VSP726A Administrator and Provisioning Manual
"Customizing Soft Keys" on page
Default:
dir,redial,call_log,cfwd,
message,dnd,line
Default:
end,transfer,conf,
record,hs_pick
Default:
end,new,resume,transfer,
conf,hs_pick
Default:
backspc,input,dial,
redial
211
21. You
Back to Contents
Advertisement
Table of Contents
