Table of Contents
Advertisement
Configuration File Parameter Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
Setting:
sip_account.x.check_trusted_certificate
Description:
Enables or disables accepting only a trusted TLS certificate for account x.
Values:
0 (disabled), 1 (enabled)
Setting:
sip_account.use_first_trusted_certificate_for_all
Description:
Enables or disables accepting the first TLS certificate for all accounts.
Values:
0 (disabled), 1 (enabled)
Setting:
sip_account.x.park_variant
Description:
Selects how the VSP726A handles call parking, depending on the
service provider. When the default "broadsoft" variant is selected, calls
are parked via a PFK and a feature access code. The target number for
the "park" request is formed by concatenating "Call Park FAC" of the
call-to-be-parked account and the value entered for the Park PFK.
When the "asterisk" variant is selected, calls are parked through a blind
transfer to a parking lot extension.The target parking lot extension will be
taken from the following order of priority (if both values exist):
Park PFK Value
Call Park FAC Value
Values:
broadsoft, asterisk
Setting:
sip_account.x.server_side_ctrl_variant
Description:
Set the server type that will control feature sync and FAC operation.
Values:
default, comverse
Setting:
sip_account.x.preferred_ptime
Description:
Enter the packetisation interval time in milliseconds.
Values:
10, 20, 30, 40, 50, 60
Setting:
sip_account.x.cid_src_priority.1
Description:
Set the desired caller ID source to be displayed on the incoming call
screen.
Values:
pai, from
VSP726A Administrator and Provisioning Manual
Default:
0
Default:
0
Default:
broadsoft
Default:
default
Default:
20
Default:
pai
143
Back to Contents
Advertisement
Table of Contents
