Appendix A: Configuration File Settings; Sip_Account" Module: Sip Account Settings; General Configuration File Settings - VTech VSP725 Administrator And Provisioning Manual

Appendix A: Configuration File Settings

This section lists the available options for all the settings within the configuration file.
Most settings in the configuration file have an equivalent in the WebUI (see the
settings tables in Using the WebUI on page 18). However, the options you must
enter when editing the configuration file have a different syntax and format.
The settings are divided into modules. Each module loosely corresponds to a page on
the WebUI. You may wish to reorganize the modules within the configuration file
itself. The configuration file settings can be listed in any order, and the configuration
file will still be valid.

"sip_account" Module: SIP Account Settings

The SIP Account settings enable you to set up individual accounts for each user. You
can add up to three accounts for each phone. Each account requires you to configure
the same group of SIP account settings. The SIP account settings for each account
are identified by the account number, from 1 to 3 for the VSP725 deskset, for
example.
For example, for account 1 you would set:
sip_account.1.sip_account_enable = 1
sip_account.1.display_name = 1001
sip_account.1.user_id = 2325551001
and so on.
For account 2, you would set:
sip_account.2.sip_account_enable = 1
sip_account.2.display_name = 1002
sip_account.2.user_id = 2325551002
and so on.
The SIP account settings follow the format: sip_account.x.[element], where x is an
account number ranging from 1 to 3 for the VSP725 deskset, for example.
All these settings are exported when you manually export the configuration from the
phone.

General Configuration File Settings

Setting:
sip_account.x.dial_plan
Description: Sets the dial plan for account x. See Dial Plan on page 23.
Values: Text string
VSP725 Administrator and Provisioning Manual
Default: Blank
85 Appendix A: Configuration File Settings