Adding A Custom Logo; Idle Screen Logo Behaviour; Logo Specifications; Uploading A Custom Logo - VTech ErisTerminal VSP726A Administrator And Provisioning Manual

Table of Contents

Advertisement

Adding a Custom Logo

Introducing the VSP726A
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
You can upload a custom logo to be displayed on the phone idle screen and during bootup.
Uploading a logo is done using the configuration file. The parameters for uploading a
custom logo are described in
bootup and idle mode is the vtech logo.

Idle screen logo behaviour

The behaviour described below is disabled by default.
You can enable the logo to appear instead of the idle screen after a specified period of
inactivity. The parameter for setting the delay before the logo appears is in the General
configuration file. See
"user_pref.idle_to_logo_timeout" on page
You can enable the phone screen to cycle between the logo and the idle screen when the
phone is in idle mode by setting both the user_pref.idle_to_logo_timeout and the
user_pref.logo_to_idle_timeout parameters. See
on page
175.

Logo specifications

The file type and dimensions for the logo are listed below.
File type:
Monochrome bitmap (.bmp)
Dimensions (w × h): Idle screen and bootup logo: 158 × 57 pixels
Positioning a custom logo on the screen is a matter of creating a logo with the maximum
dimensions listed above, including any surrounding white space. Note that the width of the
logo specified in the table above is the same as the width of the VSP726A screen (158
pixels). There are no configuration file settings to specify the x-axis or y-axis position of the
logo on the screen.

Uploading a custom logo

The file.bootup_logo and file.idle_logo parameters in the configuration file allow you to
upload a custom bootup logo and custom idle logo. Place the logos on your server and
enter the URL for each logo for the file.idle_logo and file.bootup_logo parameters.
If the downloaded logo is found to be invalid, the syslog will record one of the following
errors:
file not found
invalid file format
VSP726A Administrator and Provisioning Manual
"Uploading a custom logo" on page
"user_pref.logo_to_idle_timeout"
19
19. The default logo for
175.
Back to Contents

Advertisement

Table of Contents
loading

Table of Contents