Table of Contents
Advertisement
log Module: System Log Settings
Configuration File Parameter Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
The log settings control system logging activities. System logging may be required for
troubleshooting purposes. The following logging modes are supported:
Serial/Console—system log output to an external console using a serial/RS-232
cable
Syslog server—output to a log file on a separate server
Volatile file
The log settings follow the format: log.[element].
All the log settings are included in the general configuration file.
Setting:
log.syslog_enable
Description:
Enables or disables log output to syslog server.
Values:
0 (disabled), 1 (enabled)
Setting:
log.syslog_server_address
Description:
Sets the syslog server IP address.
Values:
IPv4, IPv6 or FQDN
Setting:
log.syslog_server_port
Description:
Sets the syslog server port.
Values:
1–65535
Setting:
log.syslog_level
Description:
Sets the log level. The higher the level, the larger the debug output.
5—all
4—debug
3—info
2—warning
1—error
0—critical
Values:
0–5
VSP726A Administrator and Provisioning Manual
Default:
0
Default:
Blank
Default:
514
Default:
2
167
Back to Contents
Advertisement
Table of Contents
