Basic Settings; Initialization Of Ge314; How To Enter The Setup Menu - IDTECK GE313 Operating Manual

7.

BASIC SETTINGS

7 .1 INITIALIZATION OF GE313
U
After the all installation and connections are completed, press and hold the Initialize button and put the power
(+12V DC) to GE313. The LCD will first display "Initialize OK? 0:No 1:Yes". Press <1> key if you want to
initialize the system. After all Initialization process is completed, the system is operating on normal mode and
the LCD displays "GE Security, GE313 [F1], Date Time".

7 .2 HOW TO ENTER THE SETUP MENU

U
To setup or to change the GE313 settings, you have to enter the SETUP MENU first. To do so, press <0> key
eight times (Default Master ID '00000000') and <ENT> key from the Keypad. You now entered to the
SETUP MENU. There are 8 SETUP MENU and you first get into [F1 SETUP MENU]. You can move to
another SETUP MENU by pressing <F1> key to <F8> key button. For example, if you want to go to [F2
SETUP MENU] then press <F2> key, for [F5 SETUP MENU] then press <F5> key and so on. There are
several SUBMENU on each SETUP MENU and you can scroll up and down the SUBMENU by pressing
<4> and <6> key on each SETUP MENU. If you don't press any key for 60 seconds or if you press <ESC>
key, GE313 will exit the SETUP MENU and return to normal operation mode. You can also change the
Master ID in the [F4 SETUP MENU].
22