Connecting Local Area Networks; Ethernet Switch; Cascade Cables For Ethernet Switches; Mps 500 Rear Panel Ethernet Connections - Avaya Media Processing Server 500 Hardware Installation And Maintenance

Installing Hardware and Configuring Connectivity
Pin Signal
2 T1 (receive, tip)
3 Not Used
4 T (transmit, ring)
5 R (transmit, tip)
6 Not Used
7 Not Used
8 Not Used

Connecting Local Area Networks

Ethernet Switch

An Ethernet switch is used to provide connectivity between the internal cabinet devices. The
standard setup is as a private LAN and is not normally incorporated as part of an Avaya server
subnet (formerly named CLAN). MPS 500 supports Ethernet Switch ERS 4850GTS.
Note:
Refer to your System Definition Package (SDP) for the internal LAN configuration of your
system.

Cascade Cables for Ethernet Switches

All Ethernet Switches require cascade cables for LAN redundancy.

MPS 500 Rear Panel Ethernet Connections

The following diagram shows the rear panel Ethernet connections.
Avaya Media Processing Server 500 Hardware Installation and Maintenance
42
Comments? infodev@avaya.com
October 2014