Safety And Electromagnetic Compatibility (Emc) Standards - Applied Biosystems 7500 Getting Started

Preface

Safety and Electromagnetic Compatibility (EMC) Standards

Safety and Electromagnetic Compatibility (EMC) Standards
U.S. and
Canadian Safety
Standards
Canadian EMC
Standard
European Safety
and EMC
Standards
Australian EMC
Standards
xxii
Applied Biosystems 7500/7500 Fast Real-Time PCR System Getting Started Guide for Standard Curve
This section provides information on:
• U.S. and Canadian Safety Standards
• Canadian EMC Standard
• European Safety and EMC Standards
• Australian EMC Standards
This instrument has been tested to and complies with standard UL 61010A-1, "Safety
Requirements for Electrical Equipment for Laboratory Use, Part 1: General
Requirements" and with standard UL 61010-2-010, "Particular Requirements for
Laboratory Equipment for the Heating of Materials."
This instrument has been tested to and complies with standard CSA 1010.1, "Safety
Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use,
Part 1: General Requirements."
This instrument has been tested to and complies with ICES-001, Issue 3: Industrial,
Scientific, and Medical Radio Frequency Generators.
Safety
This instrument meets European requirements for safety (Low Voltage Directive
2006/95/EC). This instrument has been tested to and complies with standards EN 61010-
1:2001, "Safety Requirements for Electrical Equipment for Measurement, Control and
Laboratory Use, Part 1: General Requirements" and EN 61010-2-010, "Particular
Requirements for Laboratory Equipment for the Heating of Materials," and with
standard EN 61010-2-081:2002+A1:2003 "Particular Requirements for Automatic and
Semi-Automatic Laboratory Equipment for Analysis and Other Purposes."
EMC
This instrument meets European requirements for emission and immunity (EMC
Directive 2004/108/EC). This instrument has been tested to and complies with standard
EN 61326 (Group 1, Class B), "Electrical Equipment for Measurement, Control and
Laboratory Use – EMC Requirements."
This instrument has been tested to and complies with standard AS/NZS 2064, "Limits
and Methods Measurement of Electromagnetic Disturbance Characteristics of Industrial,
Scientific, and Medical (ISM) Radio-frequency Equipment."
Experiments