Template Workflow - Applied Biosystems 7500 Getting Started

Appendix A Alternate Experiment Workflows

Template Workflow

Template Workflow
Create a
Template
Create an
Experiment with a
Template
Notes
102
Applied Biosystems 7500/7500 Fast Real-Time PCR System Getting Started Guide for Standard Curve
You can use a template to create a new experiment. Templates allow you to create many
experiments with the same setup information.
1. Double-click
(7500 software) or select Start All Programs
Biosystems 7500 Software <software name>
where <software name> is the current version of the 7500 software.
2. Open an existing experiment, or create a new experiment.
You can create a new experiment using the Design Wizard (see
Note:
Advanced Setup (see
3. Select File Save As Template.
4. Enter a file name, select a location for the template, then click Save.
5. Click
Close.
1. In the Home screen, click
Note: If you do not see the Template icon, click the arrow beneath the Design
Wizard icon to expand the Set Up menu.
2. Locate then select the template you created in
Open. A new experiment is created using the following setup information from the
template:
• Experiment properties
• Plate setup
• Run method
• Reaction setup
3. (Optional) If you want to modify the experiment, use Advanced Setup (see
4. Click Save, enter a file name, then click Save to save the experiment.
page 98).
Template.
steps 1 through 5
Applied
Chapter 2) or
above, then click
page 98).
Experiments