Configuration - Assa Abloy Traka Touch Series User Manual

10.15 CONFIGURATION

The Config administration section allows you load a new configuration file into the system. This is required if a customer
has requested additional software options or has had a change of reader for example. Traka will then compile a new
configuration file and send it to you to import via a USB memory stick.
To access the configuration page an admin user will need to log into the system. For further details on how to access
the system please refer to the 'Accessing the System' section.
1. Once you have the new configuration file, copy it to a usable USB memory stick.
2. Access the system and click the Admin button.
3. Click the Config button.
4. Click the Import button in the bottom right hand corner of the Configuration screen.
V4.3 10/09/19
This Document is uncontrolled when printed unless over stamped "CONTROLLED DOCUMENT"
UD0090 Page 92 of 143