Power Settings - Assa Abloy Traka Touch Series User Manual

10.14 POWER SETTINGS

The Power Administration section allows you to change the touch screen brightness under certain conditions, such as
when the Battery is Low or Critical, or when the system is running on Mains etc.
To edit these options, an admin user will need to log into the system. For further details on how to access the system
please refer to the 'Accessing the System' section.
1. Click the Admin button.
2. Click the Power button.
Power Options
To change any of the power options simply click either of the arrow keys to the right of the description. The
power options are as follows...

Set backlight when running on mains

Set backlight when running on battery

Set backlight when the battery is low

Set backlight when the battery is critical

Set backlight when the screensaver activates
NOTE: Only applies if backlight is not already darker

Activates screensaver after x seconds of no activity
The Defaults button sets all your custom power options back to the Traka default settings.
V4.3 10/09/19
This Document is uncontrolled when printed unless over stamped "CONTROLLED DOCUMENT"
UD0090 Page 90 of 143