Table of Contents
Advertisement
8.3.6
USER ENROLMENT ID
An Enrolment ID is a number assigned to a user to enable them to enrol directly at the Traka system without the need
for an admin user to be present. This feature can be used only with Card or Biometric readers.
To use the enrolment ID feature you must first specify whether the system is fitted with the integrated Sagem Biometrics
Reader or a Card Reader in the Reader Admin options.
1.
An admin user is required to access the system and select Admin.
2.
Select Reader.
3.
Select the relevant reader type for the Enrolment ID enrolment method. If you have both types of reader fitted
to your system select the one you wish to use for enrolling with the enrolment ID. Click Save.
The Enrolment ID must be entered into the correct field in either the user record within the Traka Touch System, or in
the Enrolment ID field in the user import spreadsheet. If your system is being used in conjunction with Traka Web, the
enrolment ID can be entered in the user record under the 'System Access' tab. Refer to UD0018 - Traka Web User Guide
for more information.
The example below shows how to assign an Enrolment ID to a user at the Traka Touch system. For more information on
how to import users via a spreadsheet refer to the section 'Exporting & Importing'.
NOTE:
The following must be carried out by an Admin User.
1.
Create a new, or edit an existing user.
2.
Enter the Enrolment ID into the Enrolment ID field. Enter any other required details including any access the
user may require and click Save.
V4.3 10/09/19
This Document is uncontrolled when printed unless over stamped "CONTROLLED DOCUMENT"
UD0090
Page 34 of 143
Advertisement
Table of Contents
