Network Administration - Assa Abloy Traka Touch Series User Manual

10.6

NETWORK ADMINISTRATION

This section is only applicable if you wish to connect your Traka Touch Locker system to Traka Web.
Please ensure Traka Web has been installed and configured before continuing. Please read the latest revision of TD0013
– Traka Web Installation Guide for more information.
NOTE: This action can only be performed by an Admin user. Please refer to 'Accessing the System' for further
details.
1. Access the system and click the Admin button.
2. Click the Network button.
3. To enable communications with Traka Web simply select the red line button and ensure the symbol changes to
a green tick. The Comms Engine and the Security Mode will remain unknown until you are connected to Traka
Web. Once connected the comms engine will display the IP address and the security mode will show the security
type used e.g. comms Engine – 10.0.1.32. Security Mode – SSL
4. To save changes click Save. To view/change other settings please click the NIC button.
V4.3 10/09/19
This Document is uncontrolled when printed unless over stamped "CONTROLLED DOCUMENT"
UD0090 Page 66 of 143