Table of Contents
Advertisement
16.7.3
BATTERY CONNECTION DETAILS
The following diagram shows the connection details for the Traka Touch Backup Battery. For details on where to connect
the battery to the Traka Touch PCB refer to the
For Battery disconnection, carefully disconnect the spade connectors from the battery.
WARNING:
Never disconnect the wires from the green connector whilst the cable is still connected to the
battery terminals.
NOTE:
Ensure that the spade connectors are pushed fully onto the battery terminals. It is recommended
that insulation tape is wrapped around the battery to fully cover any exposed parts of the battery terminals.
16.8 ZIP AND EXPORT ALL LOG FILES AND SQL CE DATABASE TO USB
1.
From the Admin menu select the Application diagnostic followed by Export App Log File to USB.
2.
You will be asked if you want to export the 'Current database'. The door will pop open and you must now
insert a USB memory stick.
V4.3 10/09/19
This Document is uncontrolled when printed unless over stamped "CONTROLLED DOCUMENT"
'Traka Touch
PCB' section.
UD0090
Page 134 of 143
Advertisement
Table of Contents
