Table of Contents
Advertisement
16. GENERAL MAINTENANCE
16.1
POWERING ON/OFF THE SYSTEM
Disconnecting the system directly from the mains could result in data loss and should only be done in an emergency.
Therefore, to safely switch off the system and prevent any data loss follow the steps below:
To power on/off the system you will need to gain access to the Traka Touch PCB located on the back of the Control
Panel. For information on accessing the Control Panel please refer to the section
1.
To power Off the system press and hold the button highlighted below for 5 seconds.
2.
To power On the system simply press this button once.
V4.3 10/09/19
This Document is uncontrolled when printed unless over stamped "CONTROLLED DOCUMENT"
'Opening the Control
UD0090
Panel'.
Page 124 of 143
Advertisement
Table of Contents
