Table of Contents
Advertisement
16.4
OPENING THE CONTROL PANEL
Traka Lockers can be designed in various ways to suit the customers' requirements. As a result, the process for opening
the control panel may differ slightly between systems. However, the Control Electronics will always be locked behind the
panel containing the touch screen. The following describes the process for opening the Control Panel on the most
commonly used Control Pod design.
NOTE:
If your system design is different to the one described below and you are unsure of how to open the
Control Panel, please contact Traka using the contact details on the last page of this document.
Every Traka Touch Locker System is supplied with 2 Master keys used for accessing the Control Panel.
1.
Insert the Master key into the Cam Lock on the Control Panel.
2.
Whilst supporting the Control Panel, turn the key 90° clockwise. Take care at this point as the control panel will
start to tilt forward.
V4.3 10/09/19
This Document is uncontrolled when printed unless over stamped "CONTROLLED DOCUMENT"
UD0090
Page 128 of 143
Advertisement
Table of Contents
