Card Id Only Access; Fingerprint Access - Assa Abloy Traka Touch Series User Manual

8.1.3

CARD ID ONLY ACCESS

1. Swipe or present your card/token to the reader.
2. Verify your user name on the touch screen.
8.1.4

FINGERPRINT ACCESS

For details on how to set up the Sagem Fingerprint reader, please review the 'Sagem
Morphosmart Fingerprint Reader' section.
1. Touch the screen to bring the system out of idle mode.
2. The reader will illuminate red. Place your finger on the reader.
3. Verify your user name on the touch screen.
NOTE: If users also have Keypad ID set against their user details they will
not be prompted to enter it after they have identified themselves via
fingerprint.
V4.3 10/09/19
This Document is uncontrolled when printed unless over stamped "CONTROLLED DOCUMENT"
UD0090 Page 19 of 143