Table of Contents
Advertisement
10.3
ITEM AUTHORISATION
In addition to the standard release of items, authorisation can be configured to force either 1, 2 or 3 people to
authorise the access of specific items.
When using authorisation there are generally two types of user, Authorisers (for example security guards) and
Standard Users (for example employees). Each item can be configured individually with no authorisation, 1
authorisation, 2 authorisations or 3 authorisations.
NOTE:
To configure a User to be an Authoriser please refer to the 'Users' section.
10.3.1
SETTING UP THE ITEMS
NOTE:
This action can only be performed by an Admin user. Please refer to the 'Users' section for further
details.
1.
Access the system.
2.
Select the Admin Menu.
3.
Select Items.
4.
The current item list will then be displayed. Highlight the desired item and select the Edit button.
5.
When the item details window appears, select the Options button.
6.
From the top of the page you can select the number of authorisers that are required to remove this item by using
the directional arrow key.
7.
When you have made your selection click the Save button to go back to the item list. From there click Exit to go
back to the admin menu, and Exit again to go back to the main login screen.
V4.3 10/09/19
This Document is uncontrolled when printed unless over stamped "CONTROLLED DOCUMENT"
UD0090
Page 53 of 143
Advertisement
Table of Contents
