Enforce Tls 1.2; Changing Certificates In The Traka Touch 'Root Store - Assa Abloy Traka Touch Series User Manual

10.6.1

ENFORCE TLS 1.2

Within Traka Touch Network Administration, there is an Administration Option called Enforce TLS 1.2
This option is turned off by default. In this state, Traka Touch will communicate with the Comms Engine using TLS 1.0.
With the option enabled, Traka Touch will ONLY communicate with the Comms Engine using TLS 1.2
IMPORTANT: A diagnostics option is available within Network Administration. With the Enforce TLS 1.2
enabled you can configure TLS 1.2 logging levels. This should only be used under the guidance of Traka
Support.
10.6.2

CHANGING CERTIFICATES IN THE TRAKA TOUCH 'ROOT STORE'

In v2.3.0 or later of the Application software a new screen for certification management is added.
1. Select the Network menu from the Admin menu.
2. Select the Certs button.
The next screen will display the certificate 'Root Store'.
For more information about changing certificates in Traka Touch, please refer to TD0179 – Changing Certificates in
Traka Web & Traka Touch.
V4.3 10/09/19
This Document is uncontrolled when printed unless over stamped "CONTROLLED DOCUMENT"
UD0090 Page 67 of 143