Table of Contents
Advertisement
8.5.4
CONFIGURING ITEMS
NOTE:
This section is only applicable to RFID systems.
Configuring items must be carried out by an admin user. Please refer to the 'Users' section for more details.
1.
Using the master override key, open each compartment and place the items in the correct locations and close
the doors.
2.
Log into the system.
3.
Click Admin.
4.
Click Items.
5.
The item list will currently be populated with unrecognised items. To synchronise your items click the Setup
button.
6.
You will be asked if you wish to setup all items. Click Yes.
7.
The item list will now begin to populate, showing all the items that are being recognised. This process is
displayed via the small blue progress bar in the top right corner of the window.
8.
At this point you can choose to give each item a description. To do so simply highlight the desired item and
click the Edit button.
V4.3 10/09/19
This Document is uncontrolled when printed unless over stamped "CONTROLLED DOCUMENT"
UD0090
Page 40 of 143
Advertisement
Table of Contents
