Serial Number/Rating Plate Location - Assa Abloy Traka Touch Series User Manual

3. Carefully tilt the Control Panel forward and it will rest on the restraining cable.
Opening the Control Panel gains access to the Control Electronics for the system. This may be required for various
reasons including accessing the USB ports, and locating the Serial Number/Rating Plate. To locate the position of the
USB ports and other features on the PCB see the 'Traka Touch PCB' section.
16.5

SERIAL NUMBER/RATING PLATE LOCATION

Every Traka System has a Serial Number/Rating Plate label attached. This label contains not only the unique serial
number of the system but also electrical information.
In some scenarios it may be necessary to access this label. Traka Lockers can be designed in various ways which means
the exact location of the rating plate may differ between systems. However, in principal the location of the rating plate
will be behind the Control Panel. For more details on opening the Control Panel see the previous section 'Opening the
Control Panel'.
V4.3 10/09/19 UD0090 Page 129 of 143
This Document is uncontrolled when printed unless over stamped "CONTROLLED DOCUMENT"