Rear Panel Description; Axis Connectors (Axis 1 - Axis 8) - Newport XPS-D Startup Manual

XPS-D Controller
2.6

Rear Panel Description

The Main Power ON/OFF Switch is located next to the inlet for the power cord.
The switch and the inlet must be accessible to the user.
2.6.1 Axis Connectors (AXIS 1 – AXIS 8)
Each installed axis driver card features a connector to attach a cable (supplied with
every Newport stage) between the controller and a motion device.
Please see the next section for installation instructions.
Figure 8: Rear panel of XPS Controller/Driver.
NOTE
Figure 9: Axis driver card.
9
Start-Up Manual
EDH0395En1031 – 09/18