Danfoss VLT AQUA Drive Design Manual page 105

VLT ® AQUA Drive Design Guide
PC Software - MCT 10
All drives are equipped with a serial communication port. We provide a PC tool for communication
between PC and adjustable frequency drive, called the VLT Motion Control Tool MCT 10 Set-up
software.
MCT 10 Set-up Software
MCT 10 has been designed as an easy-to-use interactive tool for setting parameters in our ad-
justable frequency drives.
The MCT 10 Set-up software will be useful for:
•
•
•
•
•
•
MCT 10 Set-up Software support Profibus DP-V1 via a Master class 2 connection. This makes it
possible to access on-line read/write parameters in an adjustable frequency drive via the Profibus
network. This will eliminate the need for an extra communication network.
Planning a communication network off-line. The MCT 10 contains a complete adjustable
frequency drive database.
Commissioning adjustable frequency drives on-line.
Saving settings for all adjustable frequency drives.
Replacing a drive in a network
Expanding an existing network.
Drives developed in the future will be fully supported.
MG.20.N2.22 - VLT ® is a registered Danfoss trademark.
5. How to Install
5
105