Table of Contents
Advertisement
This guide provides site preparation recommendations, step-by-step procedures for rack mounting and desk mounting your switch,
inserting modules, and connecting to a power source.
CAUTION:
To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this equipment.
WARNING:
Only trained and qualified personnel can install this equipment. Read this guide before you install and power up this
equipment. This equipment contains two power cords. Disconnect both power cords before servicing.
WARNING:
This equipment contains optical transceivers, which comply with the limits of Class 1 laser radiation.
Figure 1. Class 1 laser product tag
WARNING:
When no cable is connected, visible and invisible laser radiation may emit from the aperture of the optical transceiver
ports. Avoid exposure to laser radiation. Do not stare into open apertures.
Regulatory
Marketing model S5048F-ON is represented by the regulatory model E21W and the regulatory type E21W004.
Topics:
•
Related documents
•
Information symbols
Related documents
For more information about the S5048F-ON switch, see the following documents:
•
S5048F-ON Set-up Guide
•
Open Networking Hardware Diagnostic Guide
•
S5048F-ON Release Notes
•
Dell Configuration Guide for the S5048F-ON System
•
Dell Command Line Reference Guide for the S5048F-ON System
•
Dell Networking OS9 Release Notes for the S5048F-ON System
NOTE:
For the most recent documentation, visit Dell EMC support: www.dell.com/support.
About this guide
About this guide
1
5
Advertisement
Table of Contents
