Connecting The Unit Electrically - Hydac FluidAqua Mobil FAM 5 Operating And Maintenance Instructions Manual

Connecting the unit electrically

The electrical connection of units without connection plugs to the power
supply module may be performed only by a technician with corresponding
knowledge and skills.
Make sure that the voltage and frequency specifications on the FAM type
label correspond to the existing mains voltage.
If a plug is present on the FAM or if a plug is mounted, then the FAM is to be
operated from a correspondingly fused socket.
FAM 5
BEWA FAM5 4166129a en-us 2019-03-04.docx
Exposed electrical components in the switch
cabinet
Danger of fatal injury due to electric shock
►
The electrical data on the type label of the unit is binding, and not
the data on the type label of the switch cabinet.
DANGER
Any work involving the electrical system may
only be done by a properly trained, certified
electrician.
en-US
Unit setup and connection
Page 42 / 148
2019-03-04