Technical Specifications - Hydac FluidAqua Mobil FAM 5 Operating And Maintenance Instructions Manual

Technical specifications

The FAM is able to dewater authorized fluids down to a water content of less
than 100 ppm and transformer oils down to less than 10 ppm.
As an approximate guideline, the dimensioning of the FluidAqua Mobil can be
defined in accordance with the tank volume.
Tank volume in liters
< 2000
1,000 – 7,000
7,000 – 15,000
15,000 – 25,000
25,000 – 35,000
35,000 – 45,000
> 45,000
Generally speaking, however, it must be taken into account that the design
depends on the application, the fluid and the ambient temperature, the fluid
amount and the water input into the system.
These exercise a great influence over the dewatering performance. It is for
that reason that the specifications can serve only as a starting point.
The dewatering performance is dependent upon:
Water content
Fluid temperature
Detergent additives
Volumetric flow of the FAM
FAM 5
BEWA FAM5 4166129a en-us 2019-03-04.docx
Filter Size
FAM5
FAM10/15
FAM25
FAM 45 / FAM 45 E
FAM60
FAM 75 / FAM 75 E
FAM95
en-US
Technical specifications
Dewatering
performance
Page 33 / 148
2019-03-04