Technical Data - Hydac FluidAqua Mobil FAM 5 Operating And Maintenance Instructions Manual

Technical data

Refer to the type label for specific data of the unit.
Flow rate at 50 Hz
Permitted fluids**
Sealing material
Filter size of fine filter
Filter elements
Clogging indicator
Vacuum pump type R
Vacuum pump type RD
Pump type Filling & Draining
Operating pressure
Permissible suction pressure
at suction port.
Permissible operating
viscosity range **
Permissible viscosity range for
the particle measurement
Permitted fluid temperature
range **
Permitted ambient
temperature**
Permitted storage temperature
range **
Permitted relative ambient
humidity **
FAM 5
BEWA FAM5 4166129a en-us 2019-03-04.docx
≈ 5 l/min
Fluids compatible with NBR seals:
Mineral oils to DIN 50524
Gear oils to DIN 51517, 51524
Fluids compatible with FKM (FPM, Viton
seals:
Synthetic esters (HEES) DIN 51524/2
Vegetable oils (HETG, HTG)
HFD-R fluids (not for phosphate esters that
require EPDM seals).
see model code
OLF5
N5DMxxx
Differential pressure switch with shutdown
of the unit when the filter is clogged.
Oil-lubricated rotary vane vacuum pump
Dry-running rotary vane vacuum pump (no
oil)
Gear pump
0 ... 8 bar / 0 ... 116 psi
-0.2 ... +1 bar / -2.9 ... 14.5 psi
15 ... 350 mm²/s (without integrated heater)
15 ... 550 mm²/s (with integrated heater)
15 to 200 mm²/s - with technical
measurement equipment (ACS, AC)
10 ... 80 °C / 50 ... 176 °F
10 ... 42 °C / 32 ... 107 °F
10 ... 42 °C / 32 ... 107 °F
maximum 90%, non-condensing
en-US
Technical data
®
)
Page 139 / 148
2019-03-04