Siemens SINAMICS V20 Series Operating Instructions Manual page 217

Parameter Function
r2833.0 BO: NOT 3
Output of NOT 3 element. Displays not logic of bit defined in P2832. See r2811 for the bit field description.
Dependency: See P2832
P2834[0...3] BI: D-FF 1
P2834[0], P2834[1], P2834[2], P2834[3] define inputs of D-FlipFlop 1, outputs are r2835, r2836.
Index: [0]
[1]
[2]
[3]
Dependency: P2801[12] assigns the D-FlipFlop to the processing sequence.
r2835.0 BO: Q D-FF 1
Displays output of D-FlipFlop 1, inputs are defined in P2834[0], P2834[1], P2834[2], P2834[3]. See r2811
for the bit field description.
Dependency: See P2834
r2836.0 BO: NOT-Q D-FF 1
Displays Not-output of D-FlipFlop 1, inputs are defined in P2834[0], P2834[1], P2834[2], P2834[3]. See
r2811 for the bit field description.
Dependency: See P2834
P2837[0...3] BI: D-FF 2
P2837[0], P2837[1], P2837[2], P2837[3] define inputs of D-FlipFlop 2, outputs are r2838, r2839.
Index: See P2834
Dependency: P2801[13] assigns the D-FlipFlop to the processing sequence.
r2838.0 BO: Q D-FF 2
Displays output of D-FlipFlop 2, inputs are defined in P2837[0], P2837[1], P2837[2], P2837[3]. See r2811
for the bit field description.
Dependency: See P2837
SINAMICS V20 Inverter
Operating Instructions, 07/2012, A5E03728167
Range Factory
default
- -
- 0
Binector input: Set
Binector input: D input
Binector input: Store pulse
Binector input: Reset
- -
- -
- 0
- -
Can be Scaling
changed
- -
U, T -
SET STORE
RESET D
- -
- -
U, T -
- -
Parameter list
7.2 Parameter list
Data Data Acc.
set type Level
- U16 3
- U32 / 3
Bin
Q
Q
- U16 3
- U16 3
- U32 / 3
Bin
- U16 3
217