Checking The Overhead Camshaft - Malaguti Dune X 125 Service Station Manual

Engine

Remove both cotter pins.

Release the valve springs.

Remove the cap and the valve spring.

Checking the overhead camshaft


Check the camshaft bearings for signs
of abnormal wear.
Characteristic
Standard diameter - Bearing A
19.980 - 19.959 mm (0.7866 - 0.7858 in)
Minimum diameter allowed - Bearing A
19.95 mm (0.7854 in)
Inlet cam height
31.488 mm (1.23968 in)
Exhaust cam height
30.864 mm (1.21511 in)

Check that the holes used for timing and their shoulders are not worn.

If values measured are not within the specified limits or there are signs of wear, replace the
defective components with new ones.
Characteristic
Maximum axial clearance allowed:
0.4 mm (0.0157 in)
ENG - 156
Dune 125 - Dune X 125 - Euro 4