Table of Contents
Advertisement
Electrical system
Electrical system installation
Scope and applicability
The purpose of this document is to define the correct cable harness routing layout to ensure the reliability of the
vehicle.
Materials used and corresponding quantities
The electrical system consists of the following wiring harnesses and parts:
1 x main cable harness.
Consumables such as cable clamps, cable fasteners or cable glands are indicated in the figures.
Special checks for the correct connection and routing of cables
It is extremely important that any security-locks for the following connectors are properly connected and
correctly tightened to ensure proper engine, and therefore proper vehicle, operation.
The installation is shown with the vehicle ideally
divided into three parts:
1. Front section
2. Central section
3. Rear section
Front side
INSTRUMENT PANEL
Make sure the instrument panel con-
nector (1) is correctly connected to the
instrument panel.
ELE SYS - 62
Dune 125 - Dune X 125 - Euro 4
Advertisement
Table of Contents
