Dune 125 - Dune X 125 - Euro 4
Coolant replacement
Remove the side fairings
Unscrew and remove the cap
Loosen the clamp shown in the figure
and disconnect the pipe (2)
Collect the coolant that flows out in a
suitably sized container
CAUTION
DO NOT DISPOSE OF THE FLUID INTO THE ENVIRON-
MENT.
Reconnect the pipe (2) and tighten the
clamp shown in the figure
Refill the system with the quantity de-
scribed in the technical characteristics
CAUTION
CHECK THAT THE COOLANT LEVEL IS BETWEEN THE
REFERENCE MARKS "MIN" AND "MAX"
Water pump
Cooling system
COOL SYS - 239