Supply; Tightening Torques; Fuel System - Malaguti Dune X 125 Service Station Manual

Characteristics
Specification
Front tyre pressure, rider only
Front tyre pressure, rider+ passenger
Rear (Dune 125)
Rear (Dune X 125)
Rear tyre pressure, rider only
Rear tyre pressure, rider + passenger

Supply

Specification

Tightening Torques

If the following tables do not expressly indicate the tightening torque values, refer to the table with the
generic torque values indicated below.
Metric tightening torque: TE - TEFL - SHC - TBEI
- TCC - TS
G
ENERAL TIGHTENING TORQUES FOR SELF TAPPING SCREWS FOR PLASTIC
Tightening torque
CAUTION
THE SCREWS WITH THREAD-LOCK SEALANT (PRE-IMPREGNATED) MUST BE REPLACED
WITH NEW SCREWS AFTER THEY HAVE BEEN LOOSENED.
BEFORE FITTING THE NEW SCREWS, CLEAN THE THREADED HOLES CAREFULLY, MAKING
SURE THAT ALL TRACES OF THE OLD THREAD-LOCK SEALANT HAVE BEEN ELIMINATED.
Chassis
CHAR - 14

FUEL SYSTEM

Fuel
G
ENERAL TIGHTENING TORQUES
M4
3 Nm (2.21
lb ft)
2.9 mm
2 Nm (1.48 lb ft)
Dune 125 - Dune X 125 - Euro 4
Desc./Quantity
1.9 bar (190 kPa) (27.56 PSI)
2.0 bar (190 kPa) (29.01 PSI)
130/80-17" 65P
130/80-17" 65P
2.1 BAR (210 kPa) (30.46 PSI)
2.2 BAR (210 kPa) (31.91 PSI)
Desc./Quantity
Unleaded petrol max E10 (95 RON)
M5 M6
6 Nm (4.43 10 Nm 25 Nm
lb ft) (7.38 lb ft) (18.44 lb ft)
3.9 mm
2 Nm (1.48 lb ft) 3 Nm (2.21 lb ft)
M8 M10 M12
50 Nm 80 Nm
(36.88 lb ft) (59.00 lb ft)
4.2 mm 5 mm
3 Nm (2.21 lb ft)