Foundation Fieldbus Configuration Tool - YOKOGAWA AXG1A Installation Manual

5.8.2 Modbus Configuration Tool and
Device Revision
When configuring the parameters by FieldMate, use the
DTM (Device Type Manager) of the following table.
DTM name
DTM Revision
Device type
Device Revision
NOTE
The DTM revision can be confirmed by "DTM setup".
Device Files is a Media included in FieldMate. The user
registration site provides Device Files with the latest
update programs.
(URL: https://voc.yokogawa.co.jp/PMK/)
When updating the DTM, following operation by "DTM
setup" is required.
• Update DTM catalog
• Assign corresponding DTM to the device.
For details, read the user's manual of FieldMate.
5.9 F
OUNDATION
Configuration Tool
The connection of the F
OUNDATION
tool is shown as below.
Read the user's manual of Modbus communication type
as listed in Table 1.1 for the detailed parameter setting via
F fielebus communication.
OUNDATION
5.9.1 Connection with F
fieldbus Configuration Tool
Connect the devices as shown in Figure blow. Connect
the terminators at both ends of the trunk, with a minimum
length of the spur laid for connection.
The polarity of signal and power must be maintained.
Fieldbus power supply
Terminator
AXW4A Modbus DTM
1.0.1.0 or later
AXW4A
1
fieldbus
fieldbus configuration
OUNDATION
ADMAG TI HOST
Terminator
F0532.ai
<5. Basic Operating Procedures>
5.9.2 F fieldbus Configuration
OUNDATION
Tool and Device Revision
(1) If the host supports DD (Device Description),
the DD of the AXG/AXW needs to be
installed.
Check if host has the following directory under its default
DD directory.
If you do not have the DD or capabilities files, you can
download them from our web page:
http://www.yokogawa.com/fld/
The device revision is as follows.
DD Revision 1 or later
Device Type AXG4A (0x0016), AXW4A (0x0017)
Device Revision 1
Read 5.7.2 HART Configuration Tool and Device
Revision. for the confirmation of DD revision.
(2) Device Type Manager (DTM) and Device
Revision
When configuring the parameters by FieldMate, use the
DTM (Device Type Manager) of the following table.
Device AXG4A
DTM Name AXG4A FF DTM
DTM Revision 3.9.2.1 later
Device Type AXG4A(0x0016)
Device Revision 1
* : The DTM is included in Yokogawa DTM Library 7.8 or later.
NOTE
The DTM revision can be confirmed by "DTM setup".
Device Files is a Media included in FieldMate. The user
registration site provides Device Files with the latest
update programs.
(URL: https://partner.yokogawa.com/japan/fieldmate/)
When updating the DTM, following operation by "DTM
setup" is required.
• Update DTM catalog
• Assign corresponding DTM to the device.
For details, read the user's manual of FieldMate.
56
AXW4A
AXW4A FF DTM
3.9.2.1 later
AXW4A(0x0017)
1
IM 01E24A01-01EN