YOKOGAWA AXG1A Installation Manual page 33

Remote Transmitter
AXFA11G
Optional
Code
EW 5 pcs. of waterproof gland with JIS G3/4 female
EG 5 pcs. of waterproof gland
EU 5 pcs. of waterproof gland with union joint
EP 5 pcs. of plastic gland
IMPORTANT
Apply a blanking plug to the unused cable entry. Seal
the cable entries properly comply to usage state.
4.3.1 When waterproof property is neces-
sary (Wiring using waterproof glands)
IMPORTANT
To prevent water or condensation from entering the
transmitter housing, waterproof glands are recommended.
Do not over-tighten the glands or damage to the cables
may result. Tightness of the gland can be checked by
confirming that the cable is held firmly in place.
For working on the conduit or the flexible tubes (G1/2),
remove the waterproof gland and attach them directly to
the cable entry.
Description
<4. Wiring>
(1) Waterproof Gland
Integral Flowmeter
Optional code: EG2, EG3
Washer
Gasket
Waterproof gland
Cable
Remote Sensor
Optional code: EG
Washer
Gasket
Waterproof gland
Cable
Remote Transmitter (AXW4A)
Optional code: EG4, EG5
Washer
Gasket
Waterproof gland
Cable
Remote Transmitter (AXG1A/AXFA11)
Optional code: EG5 (AXG1A), EG (AXFA11)
Washer
Gasket
Waterproof gland
Cable
32
F0405.ai
F0406.ai
F0407.ai
F0408.ai
IM 01E24A01-01EN