Preliminary Work; Heater Installation Location - Webasto Thermo Top Evo Installation Documentation

Preliminary work

WARNING!
- Open the fuel tank cap and vent the fuel tank.
- Close the fuel tank cap again.
- Depressurise the cooling system.
- Copy the factory number from the original type label to the duplicate type label.
- Remove year that does not apply from the duplicate label.
- Attach the duplicate label (type label) in the appropriate place.
- Declamp and remove battery.
- Remove engine cover
- Remove windscreen wiper
- Remove cover of coolant reservoir
- Remove cover of coolant reservoir for engine compartment
- Discharge coolant according to the manufacturer's instructions
- Remove intake manifold
- Remove engine underride protection
- Remove underbody trim at the near the tank
- Detach heat protection trim of exhaust system in the area of the tank
- Remove tank
- Remove the footwell trim on the front passenger side.
- Remove the glove compartment.
- Remove shift lever trim
- Remove trim of centre console
- Remove A/C control panel in accordance with manufacturer's instructions.
- Remove A-pillar trim of the footwell on the front passenger side (only with Telestart)
Remove page 29 "Operating instructions for end customer" and add to the vehicle operating instruc-
tions.
1316981B_EN
Ford Focus / C-Max / Grand C-Max
1

Heater installation location

1 Heater
1
Installa-
tion loca-
tion
5