Resetting To Factory Default Settings - Motorola Avigilon H5A Series Installation Manual

Resetting to Factory Default Settings

If the device no longer functions as expected, you can choose to reset the device to its factory default
settings.
Use the firmware revert button to reset the device. The firmware revert button is shown in the following
diagram:
For models that feature a microSD card slot, resetting the camera will not affect video that has been
recorded to the microSD card.
Figure 3:
The firmware revert button on the dome camera.
1. Ensure the device is powered on.
2. Using a straightened paperclip or similar tool, gently press and hold the firmware revert button.
3. Release the button after three seconds.
CAUTION — Do not apply excessive force. Inserting the tool too far may damage the camera.
Resetting to Factory Default Settings 56