Download  Print this page

Outdoor Surface Mount Installation; Required Tools And Materials; Camera Package Contents; Installation Steps - Motorola Avigilon H5A Series Installation Manual

Hide thumbs

Advertisement

Outdoor Surface Mount Installation

Required Tools and Materials

 
Small slotted screwdriver with 5/64" or 2 mm blade width — for connecting power when not using
l
Power over Ethernet.
 
No. 2 Phillips screwdriver — for attaching camera to an electrical box or mounting surface
l
 
Silicone sealant
l

Camera Package Contents

Ensure the package contains the following:
 
Avigilon H5A Outdoor Dome Camera
l
 
Mounting template sticker
l
 
RJ-45 grommet piercing cap
l
 
Pipe grommet
l
 
4 screws and anchors for solid walls
l
 
Wall plate
l
 
T20 Pin-In star-shaped driver
l

Installation Steps

Complete the following sections to install the device.

Mounting the Dome Camera Using the Bottom Cable Entry Hole

Perform the following steps if the required cables will be coming out of the mounting surface. Use this
procedure on surfaces that can easily be cut, such as aluminum, and when the cables should be kept out of
sight.
 1. Use the mounting template to drill 3 mounting holes and one cable entry hole into the mounting
surface.
 2. Pull the cables through the cable entry hole in the mounting surface.
 3. If a flush mount with the surface is preferred, remove the wall plate gasket.
Outdoor Surface Mount Installation
32

Advertisement

Table of Contents
loading

  Also See for Motorola Avigilon H5A Series