Resetting To Factory Default Settings - Motorola Avigilon H4M-Mt-Dcil Installation Manual
Mini dome camera with ceiling mount adapter
Table of Contents
Resetting to Factory Default Settings
If the device no longer functions as expected, you can choose to reset the device to its factory default
settings.
Use the firmware revert button to reset the device. The firmware revert button is shown in the following
diagram:
1. Ensure the device is powered on.
2. Using a straightened paperclip or similar tool, gently press and hold the firmware revert button.
3. Release the button after three seconds.
CAUTION — Do not apply excessive force. Inserting the tool too far may damage the camera.
Resetting to Factory Default Settings
22
Table of Contents
Need help?
Do you have a question about the Avigilon H4M-MT-DCIL and is the answer not in the manual?