Table of Contents
Advertisement
Resetting to Factory Default Settings
If the device no longer functions as expected, you can choose to reset the device to its factory default
settings.
Use the firmware revert button to reset the device. The firmware revert button is shown in the following
diagram:
If you have video recorded to the SD card, be aware that resetting the camera will not affect the recorded
video.
Figure 2:
The firmware revert button on the dome camera.
1. Ensure the device is powered on.
2. Using a straightened paperclip or similar tool, gently press and hold the firmware revert button.
3. Release the button after three seconds.
CAUTION — Do not apply excessive force. Inserting the tool too far may damage the camera.
Resetting to Factory Default Settings
21
Advertisement
Table of Contents
