Connecting Cables - Motorola Avigilon H5A Series Installation Manual

Connecting Cables

Refer to the diagrams in
1. If external input or output devices are part of the installation (for example: door contacts, relays, etc.),
connect the devices to the I/O connector block.
2. If an external microphone needs to be connected to the camera, connect the device to the camera
A/V connector.
For more information, see
3. (2.0 megapixel models only) If an external video monitor needs to be connected to the camera,
connect the device to the camera A/V connector.
For more information, see
4. Connect a network cable to the Ethernet port (RJ-45 connector).
The Link LED indicator will turn on once a network link has been established.
5. Connect power using one of the following methods:
Power over Ethernet (PoE) Class 3 — If PoE is available, the LEDs will turn on.
o
External Power — Connect an external 12 V DC or 24 V AC power source to the power
o
connector block.
6. Check that the Connection Status LED indicator indicates the correct state. For more information, see
Connection Status LED Indicator on
Connecting Cables
Overview on page 1 for the location of the different connectors.
Connecting to Microphones, Speakers, and Video Monitors on
Connecting to Microphones, Speakers, and Video Monitors on
page 55.
page 53.
page 53.
30