Table of Contents
Advertisement
Resetting to Factory Default Settings
If the device no longer functions as expected, you can choose to reset the device to its factory default
settings.
Use the firmware revert button to reset the device. The firmware revert button is shown in the following
diagram:
For models that feature an SD card slot, resetting the camera will not affect video that has been recorded to
the SD card.
Figure 2:
The firmware revert button in the Configuration Panel.
1. Ensure the camera is powered on.
2. Unscrew the configuration panel cover on the bottom of the camera.
3. Using a straightened paperclip or similar tool, gently press and hold the firmware revert button for 3
seconds.
4. Screw the configuration panel cover back into place.
CAUTION — Do not apply excessive force. Inserting the tool too far may damage the camera.
Resetting to Factory Default Settings
30
Advertisement
Table of Contents
